Day 1-2 Materials 1.0.5 M KCl,10 mM HEPES,pH 7.5,4℃,250 ml. 2.0.5 M KCl,50 mM HEPES,pH 8.0,4℃,250 ml. 3.Bio-Beads SM-2 in a 0.7x15 column. 4.20 mM KCl,20 mM PIPES,pH 7.0,4℃,250 ml. 5.IATR (tetramethylrhodamine iodoacetamide; Molecular Probes). Procedure 1.Thaw appropriate volume of frozen gizzard myosin to obtain 3-5 mg. 2.Dialyze against buffer 1 overnight to remove residual ammonium sulfate. 3.Clarify myosin solution at 20,000 rpm,4℃,for 30 min in a 50Ti rotor. 4.Dilute 20μl myosin with 400μl dialysis buffer.Determine concentration of myosin by reading OD280 (UV). concentration (mg/ml)= OD * 21 / 0.508 5.Measure volume of myosin.Determine total amount of myosin. 6.Dissolve 0.5-1 mg IATR in 100μl of DMSO; pipet until dye forms a fine slurry.It is very important at this point that the dye be dissolved as much as possible. 7.Add the slurry dropwise to buffer 2 while stirring,to obtain a concentration of 0.1 mg/ml. 8.Clarify dye at 35,000 rpm,4℃,for 15 min in a 50Ti rotor. 9.Carefully collect supernatant.Dilute 100 to 1000 fold and read OD at 555 nm.The volume required for reaction (in ml)is calculated as:(1.4/OD555)x mg of myosin 10.Add dye to myosin,mix gently by pipeting.Incubate on ice for 2 hr in the dark.Equilibrate column with buffer 2. 11.Apply to Bio-Beads column.Pool fractions that appear pink in roomlight. 12.Dialyze overnight against buffer 4 to precipitate myosin. Day 3 Materials 1.2 M KCl,10 mM PIPES,pH 7.0,4℃,250 ml. 2.0.45 M KCl,2 mM Tris-acetate,pH 7.0,4℃,100 ml (injection buffer). Procedure 1.Pellet myosin at 15,000 rpm,4℃,for 10 min in a SS34 rotor. 2.Soak and resuspend pellet in ~200μl of buffer 1.Handle gently. 3.Clarify at 25,000 rpm,4℃,for 20 min in a 42.2Ti rotor. 4.Determine myosin concentration using Lowry assay.Determine dye concentration by diluting conjugate 1/40 and reading OD at 555 nm.Calculate the dye/protein molar ratio. D/P = {OD555 x 41 / 60,000} / {(mg/ml)/ 470,000} 5.For microinjection,dialyze 2 hr against injection Buffer. 6.Ideal myosin concentration for injection is 7-10 mg/ml.Typical labeling ratio = 4.0-5.0. 7.Gizzard myosin good for ~2 day.Continue to dialyze against the injection buffer until just before use,then clarify. |
→如果您认为本词条还有待完善,请 编辑词条
上一篇蛋白质组研究之样品制备 下一篇Phosphoamino acid analysis:Mark Kamps's method
词条内容仅供参考,如果您需要解决具体问题
(尤其在法律、医学等领域),建议您咨询相关领域专业人士。
0