生命经纬知识库 >>所属分类 >> 蛋白质技术   

Western Blotting with Monoclonal Ant

标签: Western Blotting Monoclonal Ant

顶[0] 发表评论(35) 编辑词条

Sample Preparation

For Protein Concentration Determination of Cell Culture

1.Decant medium from 10cm dish of adherent cells and rinse plate rapidly with phosphate-buffered saline (PBS).

2.Aspirate excess PBS.

3.Add 1ml boiling lysis buffer (1% SDS, 1.0mM sodium ortho-vanadate, 10mM Tris pH7.4).

4.Scrape cells from dish, transfer to a microcentrifuge tube, and boil for an additional 5 minutes. To reduce viscosity, the sample may be sonicated briefly or passed several times through a 26-gauge needle.

5.Centrifuge the sample for 5 minutes to pellet insoluble material, then discard pellet.

6.Dilute an aliquot of the cell lysate sample at least 10-fold for the BCA (Pierce) protein concentration assay (SDS concentration must be below 0.1% to avoid interference with the colorimetric reading).
 
For Protein Gel Electrophoresis of Cell Culture (without determining protein concentration)

1.Decant medium from 10cm dish of adherent cells and rinse plate rapidly with phosphate-buffered saline (PBS).

2.Aspirate excess PBS.

3.Add 1ml boiling 2X concentrated electrophoresis sample buffer (125mM Tris pH 6.8, 4% SDS, 10% glycerol, 0.006% bromophenol blue, 1.8% beta-mercaptoethanol).

4.Scrape cells from dish, transfer to a microcentrifuge tube, and boil for an additional 5 minutes. To reduce viscosity, the sample may be sonicated briefly or passed several times through a 26-gauge needle. Centrifuge the sample for 10 minutes to pellet insoluble material. Discard pellet.

5.The cell lysate sample (supernatant) is now ready for loading onto your gel.
 
For Protein Concentration Determination of Whole Tissue

1.Rapidly homogenize every 0.25g tissue in 3.5ml of boiling lysis buffer (1% SDS, 1.0mM sodium ortho-vanadate, 10mM Tris pH 7.4).

2.Microwave for 10-15 seconds.

3.Centrifuge the homogenate (16,000 x g, 15 C) for 5 minutes to pellet insoluble material, then discard pellet.

4.Dilute an aliquot of the tissue lysate sample at least 10-fold for the BCA (Pierce) protein concentration assay.

Polyacrylamide Gel Electrophoresis

Guidelines for choosing the percent gel to be used for certain molecular weight proteins (based on 37:1 acrylamide: bis acrylamide ratio)

4-5% gels: > 250 kDa

7.5% gels: 250-120 kDa

10% gels: 120-40 kDa

13% gels: 40-15 kDa

15% gels: < 20 kDa

Gel Electrophoresis

1.If not already in electrophoresis sample buffer, add an equal volume of 2X sample buffer (125mM Tris pH 6.8, 4% SDS, 10% glycerol, 0.006% bromophenol blue, 1.8% b-mercaptoethanol) to all samples and boil for 3 minutes.

2.Apply 5-20µg total protein of cell or tissue lysate to each well of a 0.75mm thick gel. For thicker gels (1.5mm thick), apply up to 25-40µg in each well.

3.Electrophorese until the bromophenol blue in the samples reaches the bottom of the gel. Turn off power supply. Keep gels in running buffer until ready to transfer.

Protein Blotting

Wet Transfer

Note: Since extra negative charges are needed to reach 1Amp in a wet transfer system, adjust the pH of the transfer buffer to approximately pH 8.0 using NaOH.

1.For transfer of proteins smaller than 20 kDa, transfer proteins from gel to PVDF (polyvinylidene difluoride) membrane at 1Amp constant current for 45 mins or equivalent (250mAmp for 3 hours or 500mAmp for 90 minutes) in transfer buffer (25mM Tris, 190mM glycine, 20% MeOH).

2.For transfer of proteins smaller than 120 kDa, transfer proteins from gel to PVDF membrane at 1Amp constant current for 1 hour or equivalent (250mAmp for 4 hours or 500mAmp for 2 hours) in transfer buffer (25mM Tris, 190mM glycine, 20% MeOH).

3.For proteins larger than 120kDa, transfer to PVDF membrane at 1Amp constant current for 90 minutes or equivalent (250mAmp for 6 hours or 500mAmp for 3 hours) in transfer buffer + SDS (25mM Tris, 190mM glycine, 20% MeOH, 0.05% SDS).

4.For Proteins larger than 250kDa, transfer to PVDF membrane at 1Amp constant current for 1 hour and 45 minutes or equivalent (500mAmp for 3.5 hours) in transfer buffer + SDS (25mM Tris, 190mM glycine, 20% MeOH, 0.05% SDS).

Semi-Dry Transfer

For transfer of proteins from 10% or 13% gels to PVDF membranes semi-dry transfer can also be used. Transfer proteins to PVDF membrane at 1.2 mAmp/cm2 for 1 hour and 45 minutes in transfer buffer (25mM Tris, 190mM glycine, 20% MeOH).

Optional

If blots are not to be used for colorimetric detection, visualize the transferred proteins by staining the membrane for 15 minutes with India ink (Higgins black India ink, Eberhard Faber) diluted 1:1000 in wash buffer (10mM Tris pH 7.5, 100mM NaCl, 0.1% Tween 20). Rinse excess stain with wash buffer before blocking.

Blocking

For All Antibodies Except Phosphotyrosine

1.Remove the blot from the transfer apparatus or staining tray and immediately place into blocking buffer (5% non-fat dry milk, 10mM Tris pH 7.5, 100mM NaCl, 0.1% Tween 20).

2.Incubate the blot for 30 minutes at 37?C, 1 hour at room temperature, or overnight at 4?C.

For Phosphotyrosine Antibodies

Remove the blot from the transfer apparatus or staining tray and immediately place into blocking buffer (1% BSA, 10mM Tris pH 7.5, 100mM NaCl, 0.1% Tween 20).

Incubate the blot for 30 minutes at 37?C, 1 hour at room temperature, or overnight at 4?C.

Incubation with Primary and Secondary Antibodies

Primary antibody

1.Dilute the antibody in the corresponding blocking buffer.

2.Decant the blocking buffer from the blot, add the antibody solution, and incubate with agitation for 30 minutes at 37?C, one hour at room temperature, or overnight at 4?C.

Enzyme conjugated secondary antibody

Note: The inclusion of sodium azide is to be avoided in all steps using HRPO (horseradish peroxidase) conjugates.

1.Decant the primary antibody solution, add wash buffer (10mM Tris pH 7.5, 100mM NaCl, 0.1% Tween 20), and wash for 30 minutes with agitation, changing the wash buffer every 3 minutes.

2.Dilute the enzyme conjugate anti-mouse IgG:HRPO (Catalog# M15345) 1:2000 in wash buffer containing 5% non-fat dry milk (or 1% BSA for phosphotyrosine antibodies).

3.Decant the wash buffer, add the diluted enzyme conjugate and incubate with agitation for 30 minutes at 37?C or one hour at room temperature.

Substrate Incubation

1.Decant the secondary antibody solution, add wash buffer (10mM Tris pH 7.5, 100mM NaCl, 0.1% Tween 20), and wash for 30 minutes with agitation, changing the wash buffer every 3-5 minutes.

2.Decant wash buffer and place the blot in a plastic bag or clean tray containing chemiluminescent working solution (0.125 ml/cm2). Rotate the bag or tray to allow the solution to cover the surface of the membrane for 1-5 minutes.

3.Remove blot from the bag or tray and place it between two pieces of write-on acetate transparency film. Smooth over covered blot to remove air bubbles and excess substrate.

EXPOSE TO X-RAY FILM OR ANY SENSITIVE SCREEN. AN INITIAL EXPOSURE OF 10-60 SECONDS IS RECOMMENDED FOR FILM

附件列表


→如果您认为本词条还有待完善,请 编辑词条

上一篇过氧化物酶同工酶聚丙烯酰胺凝胶电泳 下一篇生化分离技术--柱层析分离

词条内容仅供参考,如果您需要解决具体问题
(尤其在法律、医学等领域),建议您咨询相关领域专业人士。
0

收藏到:  

词条信息

admin
admin
超级管理员
词条创建者 发短消息   

相关词条