6xHis-tagged protein purification using Qiagen Ni-NTA Column under Native Condit

Buffers:

Lysis Buffer (1 liter)

50 mM NaH₂PO₄ 6.90g NaH₂PO4.H₂O (MW 137.99g/mol )

300 mM NaCl(up to 2M)17.54gNaCl(MW 58.44)or 60ml 5M

10 mM Imidazole (up to 100mM)0.68g (MW 68.08 )

10 mM BME (up to 20 mM)0.69 ml stock (14.4M )

Adust pH to 8.0 using NaOH

Washing Buffer (1 liter)

50 mM NaH₂PO₄ 6.90g NaH₂PO4.H₂O(MW 137.99 )

300 mM NaCl(up to 2M)17.54g NaCl (MW 58.44 )or 60ml 5 M

20 mM Imidazole(up to 100mM)1.36g Imidazole (MW 68.08 )

10% Glycerol 100ml 100% stock

10 mM BME 0.69ml stock (14.4M )

Adjust pH to 8.0 by NaOH

Elution Buffer (1 liter)

50 mM NaH₂PO₄ 6.90g NaH₂PO4.H₂O(MW 137.99 )

300 mM NaCl17.54g NaCl (MW 58.44 )or 60ml 5 M

250 mM Imidazole 17.00g Imidazole (MW 68.08 )

Adjust pH to 8.0 by NaOH

Preparing cleared lysates under Native Conditions

1.Thaw the cell pellet for 15’ on ice and resuspend the cells in lysis buffer at 2-5 ml per gram weight (I use 10ml for 500ml culture)

2.Add lysozyme to 1mg/ml and 1xprotease inhibitors and incubate on ice for 30’

3.Sonicate on ice (use 6x10” bursts with a 10” cooling period)

Centrifuge lysate at 10,000xg for 20’ at40℃to pellet the cellular debris and save supernatant.

Add 5μl 2xSB to 5μl Supernatant and store at 200℃for SDS-PAGE analysis

Batch purification under Native Conditions

Add 2.5 ml of the 50% Ni-NTA slurry to 10 ml cleared lysate and mix gently by shaking at40℃for 60’

Load the lysate-Ni-NTA mixture into a column with the bottom outlet capped (5ml per column)

Remove bottom cap and collect the column flow through

Wash twice with 4ml washing buffer every time for each column and Save Wash

Elute the protein 4 times with 0.5 ml elution buffer per column each time,collect in 4 tubes and analyze by SDS-PAGE (run 5μl,0.05%)